OVHcloud Network Status
Current status
Legend
- Operational
- Degraded performance
- Partial Outage
- Major Outage
- Under maintenance
FS#14484 — 46.105.114.0/24 && 46.105.115.0/24
Incident
Report for Network & Infrastructure
Resolved
We've lost FEX 108 on the n5 couple that manages these networks.
I think it was caused by a Cisco bug in version 7.1.1 + chassis 5548P. The chassis doors are not connected and won't reconnect.
I will reload one of the 2 N5s to get the FEX back, if validated, and I will update the ISSU in 7.1.2 which will fix the bug..
Update(s):
Date: 2015-08-25 13:05:38 UTC
# sh install all status
This is the log of last installation.
Continuing with installation process, please wait.
The login will be disabled until the installation is completed.
Performing supervisor state verification.
SUCCESS
Supervisor non-disruptive upgrade successful.
Install has been successful.
The couple is now up-to-date. Datacentre has confirmed that all is OK.
Date: 2015-08-25 13:05:02 UTC
103 yes non-disruptive none
104 yes non-disruptive none
105 yes non-disruptive none
108 yes non-disruptive none
111 yes non-disruptive none
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------------- ---------------------- ---------------------- ------------
1 system 7.1(1)N1(1) 7.1(2)N1(1) yes
1 kickstart 7.1(1)N1(1) 7.1(2)N1(1) yes
1 bios v3.6.0(05/09/2012) v3.6.0(05/09/2012) no
1 power-seq v5.0 v5.0 no
2 power-seq v1.0 v1.0 no
3 power-seq v2.0 v2.0 no
100 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
101 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
102 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
103 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
104 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
105 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
108 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
111 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
1 microcontroller v1.2.0.1 v1.0.0.14 no
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Date: 2015-08-25 13:04:56 UTC
Module 111: Non-disruptive upgrading.
SUCCESS
Install has been successful.
Installing on the other nexus.
Date: 2015-08-25 13:04:43 UTC
Module 105: Non-disruptive upgrading.
[# ] 0%
Date: 2015-08-25 13:04:37 UTC
Pre-loading modules.
SUCCESS
Module 100: Non-disruptive upgrading.
SUCCESS
Module 101: Non-disruptive upgrading.
Date: 2015-08-25 13:04:32 UTC
# sh install all status
There is an on-going installation...
Enter Ctrl-C to go back to the prompt.
Continuing with installation process, please wait.
The login will be disabled until the installation is completed.
Performing supervisor state verification.
SUCCESS
Supervisor non-disruptive upgrade successful.
Pre-loading modules.
Date: 2015-08-25 13:04:10 UTC
Rolling to the new version in hitless
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes non-disruptive reset
2 yes non-disruptive rolling
3 yes non-disruptive rolling
100 yes non-disruptive rolling
101 yes non-disruptive rolling
102 yes non-disruptive rolling
103 yes non-disruptive rolling
104 yes non-disruptive rolling
105 yes non-disruptive rolling
108 yes non-disruptive rolling
111 yes non-disruptive rolling
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------------- ---------------------- ---------------------- ------------
1 system 7.1(1)N1(1) 7.1(2)N1(1) yes
1 kickstart 7.1(1)N1(1) 7.1(2)N1(1) yes
1 bios v3.6.0(05/09/2012) v3.6.0(05/09/2012) no
1 power-seq v5.0 v5.0 no
2 power-seq v1.0 v1.0 no
3 power-seq v2.0 v2.0 no
100 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
101 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
102 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
103 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
104 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
105 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
108 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
111 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
1 microcontroller v1.2.0.1 v1.0.0.14 no
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Date: 2015-08-25 13:03:54 UTC
Enter username: commun
Password:
***** Transfer of file Completed Successfully *****
Copy complete, now saving to disk (please wait)...
Rebooting
Date: 2015-08-25 13:03:44 UTC
Downloading the system and kickstarting the boxes.
Date: 2015-08-25 13:03:26 UTC
The FEX are back after the reload. It's definitely a bug.
Getting ready to update the ISSU.
I think it was caused by a Cisco bug in version 7.1.1 + chassis 5548P. The chassis doors are not connected and won't reconnect.
I will reload one of the 2 N5s to get the FEX back, if validated, and I will update the ISSU in 7.1.2 which will fix the bug..
Update(s):
Date: 2015-08-25 13:05:38 UTC
# sh install all status
This is the log of last installation.
Continuing with installation process, please wait.
The login will be disabled until the installation is completed.
Performing supervisor state verification.
SUCCESS
Supervisor non-disruptive upgrade successful.
Install has been successful.
The couple is now up-to-date. Datacentre has confirmed that all is OK.
Date: 2015-08-25 13:05:02 UTC
103 yes non-disruptive none
104 yes non-disruptive none
105 yes non-disruptive none
108 yes non-disruptive none
111 yes non-disruptive none
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------------- ---------------------- ---------------------- ------------
1 system 7.1(1)N1(1) 7.1(2)N1(1) yes
1 kickstart 7.1(1)N1(1) 7.1(2)N1(1) yes
1 bios v3.6.0(05/09/2012) v3.6.0(05/09/2012) no
1 power-seq v5.0 v5.0 no
2 power-seq v1.0 v1.0 no
3 power-seq v2.0 v2.0 no
100 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
101 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
102 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
103 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
104 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
105 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
108 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
111 fexth 7.1(2)N1(1) 7.1(2)N1(1) no
1 microcontroller v1.2.0.1 v1.0.0.14 no
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Date: 2015-08-25 13:04:56 UTC
Module 111: Non-disruptive upgrading.
SUCCESS
Install has been successful.
Installing on the other nexus.
Date: 2015-08-25 13:04:43 UTC
Module 105: Non-disruptive upgrading.
[# ] 0%
Date: 2015-08-25 13:04:37 UTC
Pre-loading modules.
SUCCESS
Module 100: Non-disruptive upgrading.
SUCCESS
Module 101: Non-disruptive upgrading.
Date: 2015-08-25 13:04:32 UTC
# sh install all status
There is an on-going installation...
Enter Ctrl-C to go back to the prompt.
Continuing with installation process, please wait.
The login will be disabled until the installation is completed.
Performing supervisor state verification.
SUCCESS
Supervisor non-disruptive upgrade successful.
Pre-loading modules.
Date: 2015-08-25 13:04:10 UTC
Rolling to the new version in hitless
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes non-disruptive reset
2 yes non-disruptive rolling
3 yes non-disruptive rolling
100 yes non-disruptive rolling
101 yes non-disruptive rolling
102 yes non-disruptive rolling
103 yes non-disruptive rolling
104 yes non-disruptive rolling
105 yes non-disruptive rolling
108 yes non-disruptive rolling
111 yes non-disruptive rolling
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------------- ---------------------- ---------------------- ------------
1 system 7.1(1)N1(1) 7.1(2)N1(1) yes
1 kickstart 7.1(1)N1(1) 7.1(2)N1(1) yes
1 bios v3.6.0(05/09/2012) v3.6.0(05/09/2012) no
1 power-seq v5.0 v5.0 no
2 power-seq v1.0 v1.0 no
3 power-seq v2.0 v2.0 no
100 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
101 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
102 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
103 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
104 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
105 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
108 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
111 fexth 7.1(1)N1(1) 7.1(2)N1(1) yes
1 microcontroller v1.2.0.1 v1.0.0.14 no
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Date: 2015-08-25 13:03:54 UTC
Enter username: commun
Password:
***** Transfer of file Completed Successfully *****
Copy complete, now saving to disk (please wait)...
Rebooting
Date: 2015-08-25 13:03:44 UTC
Downloading the system and kickstarting the boxes.
Date: 2015-08-25 13:03:26 UTC
The FEX are back after the reload. It's definitely a bug.
Getting ready to update the ISSU.